Lanzhou University of Technology Institutional Repository (LUT_IR)
Effect of Alloy Element Al on the Corrosion Behavior of Ni-10wt%Fe Based Alloy in Molten NaCl | |
Wang Junwei1; Jia Hongguang1; Wang Zhiping2; Zhu Tong3; Lei Fujun1; Xu Jun3 | |
2017 | |
发表期刊 | 稀有金属材料与工程 |
ISSN | 1002-185X |
卷号 | 46期号:1页码:57-62 |
摘要 | NaCl and its mixed salt have many advantages as a medium of solar energy phase change thermal storage at moderate and high temperature. But molten chloride has sharp corrosive action on metal thermal storage vessel. The corrosion behavior of three kinds of Ni-10 wt% Fe based alloy (1#, 2# and 3#) in 850 °C molten NaCl was studied. The content of Al in 1#, 2# and 3# sample was 0.0 wt%, 5.0 wt% and 10.0 wt%, respectively. The components of NaCl after corroding and corrosion products on samples surface were analyzed. Elements change trend and corrosion characteristics on cross section of the three samples were contrasted. Corrosion mechanisms were discussed finally. Results show that the kinetics curves of the three kinds of sample obey a liner rule. The average mass loss rate declines when Al is added in the sample. The rate of 2# and 3# is only 12% and 20% of that of 1#, respectively. There are two reasons for the value reduction: firstly, Al will be oxidized prior to oxidization of Fe or Ni, and the atomic mass of Al is small; secondly, Al_2O_3 is very stable at high temperature as corrosion products. However, when the content of Al is very high (for example 10 wt% in here) in Ni-10 wt% Fe based alloy, Al oxidized on sample surface provides a convenient condition for Al atom transmission from sample inside to surface. Al_2O_3 film becomes thick and exfoliates easily. The exfoliation increases the average mass loss rate in turn. |
关键词 | corrosion molten salt NaCl Al NaCl Al |
收录类别 | CSCD |
语种 | 英语 |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
WOS类目 | METALLURGY METALLURGICAL ENGINEERING |
CSCD记录号 | CSCD:5902147 |
出版者 | Science Press |
EI入藏号 | 20171203457276 |
EI主题词 | Aluminum corrosion |
EI分类号 | 539.1 Metals Corrosion - 541.1 Aluminum - 545.2 Iron Alloys - 657.1 Solar Energy and Phenomena - 804.2 Inorganic Compounds |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/72291 |
专题 | 兰州理工大学 |
作者单位 | 1.Qinghai University, National Engineering Research Center of High Performance Light Metal Alloys and Forming, Xining, Qinghai 810016, China 2.Lanzhou University of Technology, Lanzhou, Gansu 730050, China 3.Qinghai University, Xining, Qinghai 810016, China |
推荐引用方式 GB/T 7714 | Wang Junwei,Jia Hongguang,Wang Zhiping,et al. Effect of Alloy Element Al on the Corrosion Behavior of Ni-10wt%Fe Based Alloy in Molten NaCl[J]. 稀有金属材料与工程,2017,46(1):57-62. |
APA | Wang Junwei,Jia Hongguang,Wang Zhiping,Zhu Tong,Lei Fujun,&Xu Jun.(2017).Effect of Alloy Element Al on the Corrosion Behavior of Ni-10wt%Fe Based Alloy in Molten NaCl.稀有金属材料与工程,46(1),57-62. |
MLA | Wang Junwei,et al."Effect of Alloy Element Al on the Corrosion Behavior of Ni-10wt%Fe Based Alloy in Molten NaCl".稀有金属材料与工程 46.1(2017):57-62. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论