Lanzhou University of Technology Institutional Repository (LUT_IR)
Proposal for optimization of Spool Valve Flow Force Based on the MATLAB-AMESim-FLUENT Joint Simulation Method | |
Chen Qianpeng; Ji Hong; Zhu Yi; Yang Xubo | |
2018 | |
发表期刊 | IEEE ACCESS |
ISSN | 2169-3536 |
卷号 | 6页码:33148-33158 |
摘要 | This paper focuses on the open-center multi-way valve used in loader buckets. To solve the problem of excessive flow force that leads to spool clamping in the reset process, joint simulations adopting MATLAB, AMESim, and FLUENT were carried out. Boundary conditions play a decisive role in the results of computational fluid dynamics (CFD) simulation. However, the boundary conditions of valve ports depend on the hydraulic system's working condition and are significantly impacted by the port area, which has always been neglected. This paper starts with the port area calculation method, then the port area curves are input into the simulation hydraulic system, obtaining the flow curves of valve port as output, which are then applied as the boundary conditions of the spool valve CH) simulation. Therefore, the steady-state flow force of the spool valve is accurately calculated, and the result verifies the hypothesis that excess flow force causes spool clamping. Based on this, four kinds of structures were introduced in an attempt to improve the situation, and simulating calculation and theoretical analysis were adopted to verify the effects of improvement. Results show that the four structures could reduce the peak value of flow force by 17.8%, 60.6%, 61.6%, and 55.7%, respectively. Of the four, structures II, III, and IV can reduce the peak value of flow force to below reset spring force value, thus successfully avoiding the spool clamping caused by flow force. |
关键词 | Spool clamping port area calculation joint simulation CFD steady-state flow force improved structure |
DOI | 10.1109/ACCESS.2018.2846589 |
收录类别 | SCI |
语种 | 英语 |
资助项目 | National Natural Science Foundation of China[51575254] |
WOS研究方向 | Computer Science ; Engineering ; Telecommunications |
WOS类目 | Computer Science, Information Systems ; Engineering, Electrical & Electronic ; Telecommunications |
WOS记录号 | WOS:000439119500001 |
出版者 | IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/32851 |
专题 | 科学技术处(军民融合领导小组办公室) 能源与动力工程学院 |
通讯作者 | Ji Hong |
作者单位 | Lanzhou Univ Technol, Coll Energy & Power Engn, Lanzhou 730050, Gansu, Peoples R China |
第一作者单位 | 能源与动力工程学院 |
通讯作者单位 | 能源与动力工程学院 |
第一作者的第一单位 | 能源与动力工程学院 |
推荐引用方式 GB/T 7714 | Chen Qianpeng,Ji Hong,Zhu Yi,et al. Proposal for optimization of Spool Valve Flow Force Based on the MATLAB-AMESim-FLUENT Joint Simulation Method[J]. IEEE ACCESS,2018,6:33148-33158. |
APA | Chen Qianpeng,Ji Hong,Zhu Yi,&Yang Xubo.(2018).Proposal for optimization of Spool Valve Flow Force Based on the MATLAB-AMESim-FLUENT Joint Simulation Method.IEEE ACCESS,6,33148-33158. |
MLA | Chen Qianpeng,et al."Proposal for optimization of Spool Valve Flow Force Based on the MATLAB-AMESim-FLUENT Joint Simulation Method".IEEE ACCESS 6(2018):33148-33158. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Chen-2018-Proposal f(1620KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
个性服务 |
查看访问统计 |
谷歌学术 |
谷歌学术中相似的文章 |
[Chen Qianpeng]的文章 |
[Ji Hong]的文章 |
[Zhu Yi]的文章 |
百度学术 |
百度学术中相似的文章 |
[Chen Qianpeng]的文章 |
[Ji Hong]的文章 |
[Zhu Yi]的文章 |
必应学术 |
必应学术中相似的文章 |
[Chen Qianpeng]的文章 |
[Ji Hong]的文章 |
[Zhu Yi]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论