Lanzhou University of Technology Institutional Repository (LUT_IR)
题名 | 铜连铸保温炉铸造腔液面气压控制的研究 |
作者 | 刘晓光 |
学位类型 | 硕士 |
导师 | 张远深 |
答辩日期 | 2008 |
学位授予单位 | 兰州理工大学 |
学位名称 | 工学硕士 |
学位专业 | 机械电子工程 |
关键词 | 氮气的状态方程 热力学性质 模糊控制 仿真 |
摘要 | 结晶器液位控制是连铸生产中至关重要的技术,液位的波动会造成结晶器保护渣和杂质大量卷入铜水,严重影响铸坯的质量,甚至可能导致浇铸过程中的溢铜和漏铜事故的发生,因此,必须将结晶器的液位控制在一个合适的范围内。但由于结晶器液位系统具有时变性和非线性特性,而且存在许多不确定扰动因素,无法建立准确的模型,常规的控制方法已经满足不了越来越高的自动化生产和高质量的要求。本文针对氮气在铜连铸保温炉中液位控制的研究,建立氮气高温状态方程以及氮气在多变过程的热力学性质,提出用模糊PID对保温炉液位进行控制,并采用基于自适应遗传算法对模糊PID算法进行优化,获得较为理想的控制效果,提高了保温炉的安全性和经济性。 |
其他摘要 | Lever control of crystallizer is an important part during the continuous casting. The level fluctuation may lead to protective dregs and the impurities get into the copper water, which could affect the quality of the copper or even cause the copper water to leak and overflow, so the level must be controlled within a reasonable range. However the crystallizer level system has the characteristics of the non-linear and time variability, there are many unsure disturbing factors in this system so the precise mathematical model can not be proposed. The traditional control method could not be satisfying with the requirement of higher automation and quality. |
页数 | 62 |
语种 | 中文 |
学号 | 082080202014 |
文献类型 | 学位论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/98880 |
专题 | 兰州理工大学 |
作者单位 | 兰州理工大学 |
第一作者单位 | 兰州理工大学 |
推荐引用方式 GB/T 7714 | 刘晓光. 铜连铸保温炉铸造腔液面气压控制的研究[D]. 兰州理工大学,2008. |
条目包含的文件 | 条目无相关文件。 |
个性服务 |
查看访问统计 |
谷歌学术 |
谷歌学术中相似的文章 |
[刘晓光]的文章 |
百度学术 |
百度学术中相似的文章 |
[刘晓光]的文章 |
必应学术 |
必应学术中相似的文章 |
[刘晓光]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论