Lanzhou University of Technology Institutional Repository (LUT_IR)
Achieving exceptional improvement of yield strength in Mg–Zn–Ca alloy wire by nanoparticles induced by extreme plastic deformation | |
Zhang, Hongfei1,2; Ding, Yutian1,2; Li, Ruimin1,2; Shen, Yue1,2; Lei, Jian1,2 | |
2022-09-15 | |
发表期刊 | Materials Science and Engineering A |
ISSN | 0921-5093 |
卷号 | 853 |
摘要 | The size and distribution of second phase particles have an important influence on the mechanical properties of Mg alloys and further determine their application. In this study, extreme plastic deformation was employed to control the microstructure and tune the corresponding mechanical properties of Mg–Zn–Ca alloy. The uniformly dispersed nanoparticles (average diameter of ∼14.3 nm) could be successfully introduced into the Mg–Zn–Ca alloy wire after cold drawing with an area reduction of ∼99.8%, and the high yield strength of ∼285 MPa was obtained. When compared to the as-extruded alloy with yield strength of ∼171 MPa, the exceptional improvement in yield strength (∼114 MPa) for the Mg–Zn–Ca alloy wire is mainly attributed to the formation of nanoparticles. Moreover, the Mg wire also exhibited a good ductility of ∼11.8%. The results indicate that extreme plastic deformation can enable a refined microstructure to enhance the mechanical properties of Mg–Zn–Ca alloys. © 2022 Elsevier B.V. |
关键词 | Calcium alloys Magnesium alloys Microstructure Nanoparticles Plastic deformation Ternary alloys Wire Yield stress Zinc alloys Alloy wire Dispersed nanoparticles Extreme plastic deformations High ductility High yield strength Higher yield Mg alloy Mg-zn-ca alloy wire Mg-zn-ca alloys Second phase particles |
DOI | 10.1016/j.msea.2022.143733 |
收录类别 | EI ; SCIE |
语种 | 英语 |
WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
WOS类目 | Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:000843412700002 |
出版者 | Elsevier Ltd |
EI入藏号 | 20223412594557 |
EI主题词 | Ductility |
EI分类号 | 535.2 Metal Forming ; 542.2 Magnesium and Alloys ; 546.3 Zinc and Alloys ; 549.2 Alkaline Earth Metals ; 761 Nanotechnology ; 933 Solid State Physics ; 951 Materials Science |
来源库 | WOS |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/159732 |
专题 | 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者 | Ding, Yutian |
作者单位 | 1.Lanzhou Univ Technol, State Key Lab Adv Processing & Recycling Nonferrou, Lanzhou 730050, Peoples R China; 2.Lanzhou Univ Technol, Sch Mat Sci & Engn, Lanzhou 730050, Peoples R China |
第一作者单位 | 兰州理工大学; 材料科学与工程学院 |
通讯作者单位 | 兰州理工大学; 材料科学与工程学院 |
第一作者的第一单位 | 兰州理工大学 |
推荐引用方式 GB/T 7714 | Zhang, Hongfei,Ding, Yutian,Li, Ruimin,et al. Achieving exceptional improvement of yield strength in Mg–Zn–Ca alloy wire by nanoparticles induced by extreme plastic deformation[J]. Materials Science and Engineering A,2022,853. |
APA | Zhang, Hongfei,Ding, Yutian,Li, Ruimin,Shen, Yue,&Lei, Jian.(2022).Achieving exceptional improvement of yield strength in Mg–Zn–Ca alloy wire by nanoparticles induced by extreme plastic deformation.Materials Science and Engineering A,853. |
MLA | Zhang, Hongfei,et al."Achieving exceptional improvement of yield strength in Mg–Zn–Ca alloy wire by nanoparticles induced by extreme plastic deformation".Materials Science and Engineering A 853(2022). |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论