Research Progress of Friction Stir Welding with Additional Auxiliary Conditions

doi:10.11896/cldb.19050125

IR > 机电工程学院

	Research Progress of Friction Stir Welding with Additional Auxiliary Conditions
	Zeng, Jincheng 1; Song, Bo2 ; Zuo, Dunwen 3; Deng, Yongfang 1,4
	2021-04-10
发表期刊	Cailiao Daobao/Materials Reports
ISSN	1005023X
卷号	35 期号:7 页码:7162-7168
摘要	Friction stir welding (FSW) is a widely used solid phase joining technology. However, there are still a few problems for some metals such as high welding difficulty, coarse grain size, the difficulty of controlling the intermetallic compounds (IMC) in FSW joints of different materials, and the further improvement of mechanical properties of joints, which seriously hinders the development of FSW technology. Adding auxiliary conditions under the basis of the conventional FSW can effectively overcome the defects of the conventional FSW and improve the quality of the FSW joint. Limited heat production of the conventional FSW process, causing serious wear on the tool and large axial force during progress for some materials even cannot getting effective FSW joint. The researcher study on adding preheating method before welding and ultrasonic assisting during process, which effectively softened the welding material, reduced the wear of the tool during welding, reduced the axial force during welding, and improved the welding effectiveness. There are large crystal grains existed in the conventional FSW joints. The researchers used the mechanical vibration of ultrasonic to break up the dynamic recrystallized grains during the welding process, and the energy provided by the ultrasonic increases the dislocation density in the joints. The addition of the external cooling in the progress take the heat generated away, the joint can be cool rapidly, shorten grain growth time, and inhibit crystal grains growth in the joint. Most of IMCs are brittle hard phases, and they are crack sources and extension paths for joint fractures formed in the dissimilar FSW joints. The addition of ultrasonic assist can break up the formed IMC and inhi-bit formation IMC in the joint. The external cooling method can quickly take away the heat which generated in the welding process and inhibit the IMC growth. The researchers studied the effects of additional auxiliary conditions of preheating, ultrasonic and cooling conditions on the perfor-mance of joints in order to further expand the application field of FSW. These methods improve the material fluidity, obtain sound joint interface and avoiding the weld defects, which can soften the welding material with reduce the flow resistance of the material properties of the joint. This paper summarizes the additional auxiliary conditions FSW technology from the perspective of beneficial effects with additional auxiliary conditions. The latest research progress of different auxiliary methods in FSW process, grain refinement, IMC control and mechanical properties improvement are reviewed. The basic principles that various assistant modes with different beneficial effects are analyzed. This paper provide refe-rence for FSW researchers. © 2021, Materials Review Magazine. All right reserved.
关键词	Axial flow Cooling Crystals Defects Friction Grain growth Grain refinement Grain size and shape Joining Mechanical properties Preheating Research laboratories Vibrations (mechanical) Wear of materials Application fields Beneficial effects Cooling conditions Dislocation densities Friction stir welding(FSW) Joining technology Properties improvements Recrystallized grains
DOI	10.11896/cldb.19050125
收录类别	EI
语种	中文
出版者	Cailiao Daobaoshe/ Materials Review
EI入藏号	20212010359995
EI主题词	Friction stir welding
EI分类号	408.2 Structural Members and Shapes ; 538.2.1 Welding Processes ; 631.1 Fluid Flow, General ; 641.2 Heat Transfer ; 642.1 Process Heating ; 901.3 Engineering Research ; 931.1 Mechanics ; 933.1 Crystalline Solids ; 933.1.2 Crystal Growth ; 951 Materials Science
引用统计	无
文献类型	期刊论文
条目标识符	https://ir.lut.edu.cn/handle/2XXMBERH/151128
专题	机电工程学院
作者单位	1.Engineering Research Institute, Jiangxi University of Science and Technology, Ganzhou; 341000, China; 2.School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou; 730050, China; 3.College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing; 210016, China; 4.Ganzhou Fortune Electronic Co.Ltd., Ganzhou; 341000, China
推荐引用方式 GB/T 7714	Zeng, Jincheng,Song, Bo,Zuo, Dunwen,et al. Research Progress of Friction Stir Welding with Additional Auxiliary Conditions[J]. Cailiao Daobao/Materials Reports,2021,35(7):7162-7168.
APA	Zeng, Jincheng,Song, Bo,Zuo, Dunwen,&Deng, Yongfang.(2021).Research Progress of Friction Stir Welding with Additional Auxiliary Conditions.Cailiao Daobao/Materials Reports,35(7),7162-7168.
MLA	Zeng, Jincheng,et al."Research Progress of Friction Stir Welding with Additional Auxiliary Conditions".Cailiao Daobao/Materials Reports 35.7(2021):7162-7168.