Temperature and Residual Stress Field of Flux Bands Constraining Arc Welding T-joint by FEA Based on Hybrid Welding Heat Source Model and Experimental Investigation

doi:10.11896/cldb.19100032

	Temperature and Residual Stress Field of Flux Bands Constraining Arc Welding T-joint by FEA Based on Hybrid Welding Heat Source Model and Experimental Investigation
	Qiao, Jisen1,2 ; Rui, Zhenglei 1,2; Wang, Lei 1,2; Chen, Zhenwen 1,2
	2020-11-25
发表期刊	Cailiao Daobao/Materials Reports
ISSN	1005023X
卷号	34 期号:22 页码:22142-22147
摘要	A combined welding heat source model coupled by a flat gaussian and a cylindrical volume heat source was developed to analysis the evolution of welding-induced temperature, residual stress and distortion distribution during the processing of the flux band constraining arc (FBCA) welded T-joint of the -core sandwich. The experiment statistics were obtained by the infrared thermal imager and the three-coordinate instrument. By comparing the results between the experiment and simulation, it is found that the weld cross section, thermal cycle curves, welding isothermal curves and welding distortion are basically consistence between experiment and simulation, which proves the validity and feasibility of the combined welding heat source model on the analysis of this method. At the same time, it is found that the residual stress generated during the welding process is concentrated on the weld and its vicinity, which is much lower than the yield stress of the material. And the residual deformation is acceptable, that the maximum distortion happened on the edge of the panels, according to the experimental measurements. This indicates that the FBCA can effectively control the residual deformation of high-strength steel T-joints, which improves the welding technology for the sandwich panels. © 2020, Materials Review Magazine. All right reserved.
关键词	Deformation Electric welding Finite element method High strength steel Residual stresses Welds Distortion distribution Experimental investigations Induced temperature Infrared thermal imager Residual deformation Residual stress fields Thermal cycle curve Welding heat sources
DOI	10.11896/cldb.19100032
收录类别	EI
语种	中文
出版者	Cailiao Daobaoshe/ Materials Review
EI入藏号	20210209739105
EI主题词	Yield stress
EI分类号	538.2 Welding ; 538.2.1 Welding Processes ; 545.3 Steel ; 921.6 Numerical Methods ; 951 Materials Science
引用统计	无
文献类型	期刊论文
条目标识符	https://ir.lut.edu.cn/handle/2XXMBERH/150834
专题	省部共建有色金属先进加工与再利用国家重点实验室
作者单位	1.School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou; 730050, China; 2.State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou; 730050, China
第一作者单位	材料科学与工程学院; 兰州理工大学
第一作者的第一单位	材料科学与工程学院
推荐引用方式 GB/T 7714	Qiao, Jisen,Rui, Zhenglei,Wang, Lei,et al. Temperature and Residual Stress Field of Flux Bands Constraining Arc Welding T-joint by FEA Based on Hybrid Welding Heat Source Model and Experimental Investigation[J]. Cailiao Daobao/Materials Reports,2020,34(22):22142-22147.
APA	Qiao, Jisen,Rui, Zhenglei,Wang, Lei,&Chen, Zhenwen.(2020).Temperature and Residual Stress Field of Flux Bands Constraining Arc Welding T-joint by FEA Based on Hybrid Welding Heat Source Model and Experimental Investigation.Cailiao Daobao/Materials Reports,34(22),22142-22147.
MLA	Qiao, Jisen,et al."Temperature and Residual Stress Field of Flux Bands Constraining Arc Welding T-joint by FEA Based on Hybrid Welding Heat Source Model and Experimental Investigation".Cailiao Daobao/Materials Reports 34.22(2020):22142-22147.