Institutional Repository of School of Marxism
Microstructure and tribological behaviors of diffusion bonded powder sintered Cu-Sn based alloys | |
Li, Zhenyu1,2; Zhao, Gengrui1; Wang, Honggang1; Gao, Gui1; Chen, Shengsheng1; Yang, Dongya2; Fan, Yue3; Zhang, Guowei4; Xu, Hong4 | |
2021-11 | |
发表期刊 | MATERIALS RESEARCH EXPRESS |
卷号 | 8期号:11 |
摘要 | Owing to good self-lubricating performance, tin bronze is widely used in industrial fields. As tin bronze parts manufactured by powder metallurgy, their tribological performances are influenced by raw powder. In this work, four types of self-lubricating copper alloy composites (CuSn10 (D), CuSn10, CuSn10Pb10 (D) and CuSn10Pb10) were prepared by sintering completely alloyed powder and diffusion alloyed copper tin powder. The morphology, element distribution and microstructure of raw powder and their sintered Cu alloy composites were observed. The tribological properties of Cu alloys were investigated by block-ring friction test under different working conditions and their worn surface and wear debris were analyzed. The results show that the diffusion alloyed powder has an irregular dendritic morphology and its sintered Cu alloy is more likely to produce twin structure which enhances the hardness and the bearing capacity of the material. Compared with completely alloyed powder sintered CuSn10 sample, the wear rate of CuSn10 (D) sintered from diffusion alloyed powder was reduced by 83.96%, 74.39%, and 67.63% under three typical working conditions. Under dry friction conditions, the wear rate of CuSn10 (D) is reduced by 63.64% than CuSn10, and CuSn10Pb10 (D) is 25% lower than CuSn10Pb10. The investigation on the wear tracks and wear debris of Cu alloy composites showed that the diffusion alloyed powder sintered samples are inclined to form a more consecutive and integral third-body layer on wear tracks and which contributes to the better wear resistance. |
关键词 | Cu alloy diffusion alloyed powder friction and wear third-body layer |
DOI | 10.1088/2053-1591/ac31ff |
收录类别 | SCIE |
语种 | 英语 |
WOS研究方向 | Materials Science |
WOS类目 | Materials Science, Multidisciplinary |
WOS记录号 | WOS:000716748500001 |
出版者 | IOP Publishing Ltd |
来源库 | WOS |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/149977 |
专题 | 马克思主义学院 机电工程学院 |
通讯作者 | Zhao, Gengrui; Gao, Gui; Chen, Shengsheng |
作者单位 | 1.Chinese Acad Sci, Lanzhou Inst Chem Phys, Key Lab Sci & Technol Wear & Protect Mat, Lanzhou 730000, Gansu, Peoples R China; 2.Lanzhou Univ Technol, Sch Mech & Elect Engn, Lanzhou 730050, Gansu, Peoples R China; 3.Changchun Equipment Technol Res Inst, Changchun 130012, Jilin, Peoples R China; 4.North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Shanxi, Peoples R China |
第一作者单位 | 兰州理工大学 |
推荐引用方式 GB/T 7714 | Li, Zhenyu,Zhao, Gengrui,Wang, Honggang,et al. Microstructure and tribological behaviors of diffusion bonded powder sintered Cu-Sn based alloys[J]. MATERIALS RESEARCH EXPRESS,2021,8(11). |
APA | Li, Zhenyu.,Zhao, Gengrui.,Wang, Honggang.,Gao, Gui.,Chen, Shengsheng.,...&Xu, Hong.(2021).Microstructure and tribological behaviors of diffusion bonded powder sintered Cu-Sn based alloys.MATERIALS RESEARCH EXPRESS,8(11). |
MLA | Li, Zhenyu,et al."Microstructure and tribological behaviors of diffusion bonded powder sintered Cu-Sn based alloys".MATERIALS RESEARCH EXPRESS 8.11(2021). |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论