ANALYSIS OF THE TOOTH SURFACE CONTACT AREA OF A CIRCULAR-ARC-TOOTH-TRACE CYLINDRICAL GEAR UNDER LOAD

doi:10.21278/TOF.451018220

IR > 机电工程学院

	ANALYSIS OF THE TOOTH SURFACE CONTACT AREA OF A CIRCULAR-ARC-TOOTH-TRACE CYLINDRICAL GEAR UNDER LOAD
	Ma, Dengqiu 1,2; Liu, Yongping3 ; Ye, Zhenhuan 2; Wei, Yongqiao3 ; Liu, Jing 2
	2021-05
发表期刊	TRANSACTIONS OF FAMENA
ISSN	1333-1124
卷号	45 期号:1 页码:79-94
摘要	To reconstruct the tooth surface of a circular-arc-tooth-trace cylindrical gear (CATT cylindrical gear), a 3D model has been developed and the contact characteristics have been investigated. Based on the development principle and meshing theory, the tooth surface equation, tooth surface curvature equation and tooth surface contact ellipse equation of the CATT cylindrical gear were deduced, and it was proved that the contact was a point contact. Then, the tooth surface was reconstructed and a 3D model was developed. Next, by performing the finite element analysis and meshing impression experiment, it was proved again that the contact is the point contact, and the contact area became an ellipse under loading. Finally, the influences of the design parameters on the contact ellipse were investigated. The general tendency is that the elliptical contact area increases from the tooth root to the gear top; the elliptical contact area decreases when the modulus and the gear tooth number near the tooth root increase and it increases when the modulus and the gear tooth number near the tooth top increase; the elliptical contact area increases when the tooth line radius increases. The elliptical contact area decreases in a cliff-like manner near the tooth top. The research results provide a reference for the design, profile modification and lubrication of the CATT cylindrical gear.
关键词	circular-arc-tooth-trace cylindrical gear tooth surface equation contact ellipse finite element method tooth line radius module and gear tooth number
DOI	10.21278/TOF.451018220
收录类别	SCOPUS ; SCIE
语种	英语
WOS研究方向	Engineering ; Materials Science
WOS类目	Engineering, Mechanical ; Materials Science, Multidisciplinary
WOS记录号	WOS:000654137000005
出版者	UNIV ZAGREB FAC MECHANICAL ENGINEERING & NAVAL ARCHITECTURE
来源库	WOS
引用统计	被引频次：5[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	https://ir.lut.edu.cn/handle/2XXMBERH/148724
专题	机电工程学院
通讯作者	Liu, Yongping
作者单位	1.Lanzhou Univ Technol, Sch Mech & Elect, Lanzhou, Peoples R China; 2.Zunyi Normal Coll, Sch Engn & Technol, Zunyi, Guizhou, Peoples R China; 3.Lanzhou Univ Technol, Sch Mech & Elect Engn, Lanzhou, Peoples R China
第一作者单位	兰州理工大学
通讯作者单位	兰州理工大学
第一作者的第一单位	兰州理工大学
推荐引用方式 GB/T 7714	Ma, Dengqiu,Liu, Yongping,Ye, Zhenhuan,et al. ANALYSIS OF THE TOOTH SURFACE CONTACT AREA OF A CIRCULAR-ARC-TOOTH-TRACE CYLINDRICAL GEAR UNDER LOAD[J]. TRANSACTIONS OF FAMENA,2021,45(1):79-94.
APA	Ma, Dengqiu,Liu, Yongping,Ye, Zhenhuan,Wei, Yongqiao,&Liu, Jing.(2021).ANALYSIS OF THE TOOTH SURFACE CONTACT AREA OF A CIRCULAR-ARC-TOOTH-TRACE CYLINDRICAL GEAR UNDER LOAD.TRANSACTIONS OF FAMENA,45(1),79-94.
MLA	Ma, Dengqiu,et al."ANALYSIS OF THE TOOTH SURFACE CONTACT AREA OF A CIRCULAR-ARC-TOOTH-TRACE CYLINDRICAL GEAR UNDER LOAD".TRANSACTIONS OF FAMENA 45.1(2021):79-94.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Ma-2021-ANALYSIS OF （2509KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载