Two-Stage Optimization Method for the Bearing Layout of Isolated Structure | |
Dang, Yu; Zhao, GenXiong; Tian, HongTu; Li, Guobao | |
2021-02-15 | |
发表期刊 | ADVANCES IN CIVIL ENGINEERING |
ISSN | 1687-8086 |
卷号 | 2021 |
摘要 | Design of seismic isolated building is often a highly iterative and tedious process due to the nonlinear behavior of the system, a large range of design parameters, and uncertainty of ground motions. It is needed to consider a comprehensive optimization procedure in the design of isolated buildings with optimized performances. This can be accomplished by applying a rigorous optimization technique. However, due to many factors affecting the performance of isolated buildings, possible solutions are abundant, and the optimal solution is difficult to obtain. In order to simplify the optimization process, an isolated building is always modeled as a shear-type structure supported on the isolated layer, and the optimal results are the parameters of the isolated layer which could not be used as a practical design of the isolated structure. A two-stage optimization method for designing isolated buildings as a practical and efficient guide is developed. In the first stage, a 3D isolated building model is adopted that takes into account of nonlinear behavior in building and isolation devices. The isolation devices are simplified as a kind of lead-rubber bearing. The genetic algorithm is used to find the optimal parameters of the isolated layer. In the second stage, the location parameters of isolation bearing layout are optimized. Moreover, the cost of the isolation bearing layout should be as low as possible. An integer programming method is adopted to optimize the number of each type of isolator. Considering vertical bearing capacity of isolators and the minimum eccentricity ratio of the isolated layer, the optimal bearing layout of the isolated building can be obtained. The proposed method is demonstrated in a typical isolated building in China. The optimum bearing layout of the isolated building effectively suppresses the structural seismic responses, but the cost of the isolated layer might slightly increase. |
DOI | 10.1155/2021/4895176 |
收录类别 | SCIE |
语种 | 英语 |
WOS研究方向 | Construction & Building Technology ; Engineering |
WOS类目 | Construction & Building Technology ; Engineering, Civil |
WOS记录号 | WOS:000625322200003 |
出版者 | HINDAWI LTD |
来源库 | WOS |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/147462 |
专题 | 土木工程学院 |
通讯作者 | Dang, Yu |
作者单位 | Lanzhou Univ Technol, Sch Civil Engn, Lanzhou 730050, Gansu, Peoples R China |
第一作者单位 | 兰州理工大学 |
通讯作者单位 | 兰州理工大学 |
第一作者的第一单位 | 兰州理工大学 |
推荐引用方式 GB/T 7714 | Dang, Yu,Zhao, GenXiong,Tian, HongTu,et al. Two-Stage Optimization Method for the Bearing Layout of Isolated Structure[J]. ADVANCES IN CIVIL ENGINEERING,2021,2021. |
APA | Dang, Yu,Zhao, GenXiong,Tian, HongTu,&Li, Guobao.(2021).Two-Stage Optimization Method for the Bearing Layout of Isolated Structure.ADVANCES IN CIVIL ENGINEERING,2021. |
MLA | Dang, Yu,et al."Two-Stage Optimization Method for the Bearing Layout of Isolated Structure".ADVANCES IN CIVIL ENGINEERING 2021(2021). |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Dang-2021-Two-Stage (1672KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论