Regular fracture control of pressed notch bar under three-point bending

IR > 机电工程学院

	Regular fracture control of pressed notch bar under three-point bending
	Yan, Changfeng; Li, Youtang; Jin, Wuyin; Wu, Lixiao; Huang, Hua
	2008
会议名称	7th International Conference on Fracture and Strength of Solids, FEOFS 2007
会议录名称	Advanced Materials Research
卷号	33-37 PART 1
页码	61-66
会议日期	August 27, 2007 - August 29, 2007
会议地点	Urumqi, China
出版者	Trans Tech Publications
摘要	A new method for fabricating crack is introduced by pressing the wedge on bar. The path of the crack propagation is not regular when the ratio of length and diameter is less than 1.8 on the symmetrical support. The load of the wedge for pressing the notch is given in this paper. The 2-D finite element is applied to simulate the crack propagation by the maximum normal stress theory. The experimental results show that the quality of the fracture section will vary with the span on the three-point bending. In order to control the crack propagation along the desired section regularly, the asymmetrical three-point bending is proposed. The simulation results show that when the difference of the two spans is between 11 and 22 in asymmetrical three-point bending under the parameters condition, the good quality of the section will be obtained, and the experimental results also strong support the conclusion.
关键词	Control Crack propagation Cracks Fracture Fracture control Fracture section Normal stress Pressed notch Three point bending
收录类别	EI
语种	英语
EI入藏号	20082711343456
EI主题词	Finite element method
ISSN	10226680
来源库	Compendex
分类代码	921.6 Numerical Methods - 951 Materials Science
文献类型	会议论文
条目标识符	https://ir.lut.edu.cn/handle/2XXMBERH/116857
专题	机电工程学院学报编辑部
作者单位	College of Mechano-Electronic Engineering, Lanzhou University of Technology, Lanzhou 730050, China
第一作者单位	兰州理工大学
推荐引用方式 GB/T 7714	Yan, Changfeng,Li, Youtang,Jin, Wuyin,et al. Regular fracture control of pressed notch bar under three-point bending[C]:Trans Tech Publications,2008:61-66.