Effect of notched parameters on stress field of shaft under torsional loading

doi:10.4028/www.scientific.net/KEM.462-463.166

IR > 机电工程学院

	Effect of notched parameters on stress field of shaft under torsional loading
	Li, Youtang; Ma, Ping; Yan, Changfeng
	2011
会议录名称	Key Engineering Materials
卷号	462-463
页码	166-171
出版者	Trans Tech Publications Ltd
摘要	A model of notched shaft in which the crack, V-notch, U-notch and arc were described as notch uniformly, was put forward. The stress field near the notch tip of notched shaft was given using quadric coordinate system by selecting an appropriate displacement function at first, and then the stress field in Cartesian co-ordinates system was obtained. The 3-D model was set up and the local stress and strain near the tip of notch was calculated by using finite element software ANSYS, and the effect of notched parameters of shaft on stress was analysed. The results show that there is a small region, in which the effect of the tip radius and depth on the stresses is obviously. The effect of an open angle of notch on stress is very small. The smaller the ratios between the tip radius and depth of notch, the larger the stress concentrations near the tip of notch. © (2011) Trans Tech Publications.
关键词	Shaft displacement Structural loads Fracture criteria Notched parameters Quadric coordinate Shaft Stress field Torsional loadings
DOI	10.4028/www.scientific.net/KEM.462-463.166
收录类别	EI
语种	英语
EI入藏号	20110513640375
EI主题词	Stress analysis
ISSN	10139826
来源库	Compendex
分类代码	408.1 Structural Design, General - 602.1 Mechanical Drives - 951 Materials Science
引用统计	被引频次[WOS]：0 [WOS记录] [WOS相关记录]
文献类型	会议论文
条目标识符	https://ir.lut.edu.cn/handle/2XXMBERH/116241
专题	机电工程学院电气工程与信息工程学院学报编辑部
作者单位	Key Laboratory of Digital Manufacturing Technology and Application, Ministry of Education, Lanzhou University of Technology, Lanzhou 730050, China
第一作者单位	兰州理工大学
推荐引用方式 GB/T 7714	Li, Youtang,Ma, Ping,Yan, Changfeng. Effect of notched parameters on stress field of shaft under torsional loading[C]:Trans Tech Publications Ltd,2011:166-171.