Analysis of shear stress distribution at the anchorage interface of rock slope and its influencing factors under seismic action | |
Yan, Zhi-Xin1,2; Long, Zhe1; Zhang, Sen1,3; Zhou, Xiao-Liang1; Dong, Jian-Hua4; Jiang, Ping1 | |
2019-12-01 | |
发表期刊 | Zhendong Gongcheng Xuebao/Journal of Vibration Engineering |
ISSN | 10044523 |
卷号 | 32期号:6页码:1029-1040 |
摘要 | Based on the FLAC3D software, try to establish overall length grouted bolt anchorage bedding rock slope numerical analysis model by amendatory cable unit, and to improve shear stress extraction method. Shearing and evolution of bolt-mortar and mortar-rock interface are simulated and analyzed, respectively. The study found that the mortar-rock interface shear stress is far less than the bolt-mortar interface, and the distribution of shear stress is very uneven on both sides of the anchor neutral point. The shear stress near neutral point is large and the shear stress on bolt ends is small. Not only the amplitude and frequency of seismic wave has a great influence on the shear stress distribution of slope anchorage interface, but also the shear stress of slope anchorage interface increases with the increasement of seismic wave duration. The length of bolt also has a great influence on the shear stress distribution of slope anchorage interface, but the influence of anchor angle is smaller. For the first time, the shear stress distribution at the anchorage interface under earthquake is obtained, and the influence of ground motion parameters and anchorage modes on the distribution of shear stress is revealed. The study provides an reference for the design and construction of side slope anchorage. © 2019, Nanjing Univ. of Aeronautics an Astronautics. All right reserved. |
关键词 | Anchor bolts Anchorages (foundations) Bolts Earthquakes Joints (structural components) Mortar Numerical methods Rocks Seismic waves Shear flow Stress concentration Anchoring Bedding rock slope Design and construction Ground motion parameters Influencing factor Interface shear stress Numerical analysis models Rock slope |
DOI | 10.16385/j.cnki.issn.1004-4523.2019.06.012 |
收录类别 | EI |
语种 | 中文 |
出版者 | Nanjing University of Aeronautics an Astronautics |
EI入藏号 | 20200808188759 |
EI主题词 | Shear stress |
来源库 | Compendex |
分类代码 | 408.2 Structural Members and Shapes - 414.3 Mortar (Before 1993, use code 412) - 484 Seismology - 605 Small Tools and Hardware - 631.1 Fluid Flow, General - 921.6 Numerical Methods |
引用统计 | 无
|
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/114704 |
专题 | 土木工程学院 |
作者单位 | 1.School of Civil Engineering and Mechanics, Lanzhou University, Lanzhou; 730000, China; 2.School of Civil and Traffic Engineering, Henan University of Urban Construction, Pingdingshan; 467036, China; 3.Yunnan Research Institute of Highway Science and Technology, Kunming; 650051, China; 4.Western Engineering Research Center of Disaster Mitigation in Civil Engineering of Ministry of Education, Lanzhou University of Technology, Lanzhou; 730050, China |
推荐引用方式 GB/T 7714 | Yan, Zhi-Xin,Long, Zhe,Zhang, Sen,et al. Analysis of shear stress distribution at the anchorage interface of rock slope and its influencing factors under seismic action[J]. Zhendong Gongcheng Xuebao/Journal of Vibration Engineering,2019,32(6):1029-1040. |
APA | Yan, Zhi-Xin,Long, Zhe,Zhang, Sen,Zhou, Xiao-Liang,Dong, Jian-Hua,&Jiang, Ping.(2019).Analysis of shear stress distribution at the anchorage interface of rock slope and its influencing factors under seismic action.Zhendong Gongcheng Xuebao/Journal of Vibration Engineering,32(6),1029-1040. |
MLA | Yan, Zhi-Xin,et al."Analysis of shear stress distribution at the anchorage interface of rock slope and its influencing factors under seismic action".Zhendong Gongcheng Xuebao/Journal of Vibration Engineering 32.6(2019):1029-1040. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论