Institutional Repository of Coll Mat Sci & Engn
Numerical simulation of temperature field and stress-strain field in brazed-fusion butt joint between aluminum alloy and galvanized steel with different thickness by arc-assisted laser | |
Liu, Jian1; Fan, Ding1; Chen, Xiujuan2; Huang, Jiankang1; Yu, Shurong2 | |
2018-02-25 | |
发表期刊 | Hanjie Xuebao/Transactions of the China Welding Institution |
ISSN | 0253360X |
卷号 | 39期号:2页码:33-38 |
摘要 | The brazed-fusion welded joint prepared by 5A06 aluminum alloy sheet of 2 mm in thickness and ST04Z steel sheet with 1 mm in thickness was taken as the research object. Based on ANSYS finite element software, the misalign hybrid heat source combined Gaussian heat source model for TIG arc and 3D pyramidal heat source model for laser heat source was founded, and the temperature field and the stress strain distribution in the welding process were obtained by using Coupling Analysis. The results show that the are used the longitudinal stress in brazed-fusion welded joint of 5A06 aluminum alloy sheet and ST04Z steel sheet with different thickness and its adjacent zone is tensile stress. Large compressive stress and severe deformation occur in the steel side away from the weld seam. Relative small compressive stress and deformation happen in the aluminum side away from the weld seam. Temperature field and residual stress simulation results are in good agreement with the experiment results, which proves that the heat source model is correct. © 2018, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved. |
关键词 | Aluminum sheet Brazing Butt welding Compressive stress Computer simulation Deformation Galvanizing Numerical models Steel sheet Temperature Welded steel structures Welds Aluminum steel Ansys finite elements Fusion welded joints Heat source modeling Numerical simulation of temperature fields Residual stress simulations Stress and deformation Stress-strain distributions |
DOI | 10.12073/j.hjxb.2018390036 |
收录类别 | EI |
语种 | 中文 |
出版者 | Harbin Research Institute of Welding |
EI入藏号 | 20182205263444 |
EI主题词 | Aluminum alloys |
EI分类号 | 535.1 Metal Rolling - 538 Welding and Bonding - 539.3 Metal Plating - 541.1 Aluminum - 541.2 Aluminum Alloys - 641.1 Thermodynamics - 723.5 Computer Applications - 921 Mathematics |
来源库 | Compendex |
分类代码 | 535.1 Metal Rolling - 538 Welding and Bonding - 539.3 Metal Plating - 541.1 Aluminum - 541.2 Aluminum Alloys - 641.1 Thermodynamics - 723.5 Computer Applications - 921 Mathematics |
引用统计 | 无
|
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/114178 |
专题 | 材料科学与工程学院 机电工程学院 石油化工学院 |
作者单位 | 1.State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou; 730050, China; 2.School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou; 730050, China |
第一作者单位 | 兰州理工大学 |
第一作者的第一单位 | 兰州理工大学 |
推荐引用方式 GB/T 7714 | Liu, Jian,Fan, Ding,Chen, Xiujuan,et al. Numerical simulation of temperature field and stress-strain field in brazed-fusion butt joint between aluminum alloy and galvanized steel with different thickness by arc-assisted laser[J]. Hanjie Xuebao/Transactions of the China Welding Institution,2018,39(2):33-38. |
APA | Liu, Jian,Fan, Ding,Chen, Xiujuan,Huang, Jiankang,&Yu, Shurong.(2018).Numerical simulation of temperature field and stress-strain field in brazed-fusion butt joint between aluminum alloy and galvanized steel with different thickness by arc-assisted laser.Hanjie Xuebao/Transactions of the China Welding Institution,39(2),33-38. |
MLA | Liu, Jian,et al."Numerical simulation of temperature field and stress-strain field in brazed-fusion butt joint between aluminum alloy and galvanized steel with different thickness by arc-assisted laser".Hanjie Xuebao/Transactions of the China Welding Institution 39.2(2018):33-38. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论