Institutional Repository of Coll Mat Sci & Engn
Friction Stir Welding-assisted Diffusion Bond of Al/Zn/Mg Lap Joint | |
Jin Yu-hua; Gan Rui-gen; Chen Fei; Shao Qing-feng; Wang Xi-jing; Guo Ting-biao | |
2018-03-20 | |
发表期刊 | Cailiao Gongcheng/Journal of Materials Engineering |
ISSN | 10014381 |
卷号 | 46期号:3页码:55-60 |
摘要 | Dissimilar materials welding between 2mm-thick AZ31B Mg alloy and 6061 Al alloy plates in overlap form was performed using the friction stir-induced diffusion bond with zinc foil as the interlayer. The microstructure and mechanical properties of the Al/Zn/Mg lap joints were analyzed by means of SEM, EPMA, XRD, tensile experiment and Vickers hardness test. The results show that diffusion layer consists of Al enrichment zone, Al5Mg11Zn4 layer and Mg-Zn eutectic zone at proper rotation speed; however, when rotation speed is low, the residual zinc interlayer remains in the diffusion layer; when rotation speed is high, the Al-Mg intermetallic compounds are present again. Due to the existence of intermetallic compounds in diffusion layer, its microhardness is significantly higher than that of base metal. The addition of zinc foil can improve the mechanical properties of Al/Mg lap joints. According to analysis on the fracture, joint failure occurs in the diffusion layer near to Al side. © 2018, Journal of Materials Engineering. All right reserved. |
关键词 | Aluminum compounds Binary alloys Diffusion Diffusion bonding Dissimilar materials Friction Friction stir welding Intermetallics Joints (structural components) Magnesium alloys Magnesium compounds Research laboratories Ternary alloys Vickers hardness Vickers hardness testing Zinc Zinc alloys Al-alloy Diffusion layers Failure load Friction stir Joint failure Mg alloy Microstructure and mechanical properties Rotation speed |
DOI | 10.11868/j.issn.1001-4381.2016.000426 |
收录类别 | EI ; ESCI |
语种 | 中文 |
WOS研究方向 | Materials Science |
WOS类目 | Materials Science, Multidisciplinary |
WOS记录号 | WOS:000466981700009 |
出版者 | Beijing Institute of Aeronautical Materials (BIAM) |
EI入藏号 | 20183805817845 |
EI主题词 | Aluminum alloys |
EI分类号 | 408.2 Structural Members and Shapes - 531.1 Metallurgy - 531.2 Metallography - 538.2.1 Welding Processes - 541.2 Aluminum Alloys - 542.2 Magnesium and Alloys - 546.3 Zinc and Alloys - 901.3 Engineering Research - 951 Materials Science |
来源库 | Compendex |
分类代码 | 408.2 Structural Members and Shapes - 531.1 Metallurgy - 538.2.1 Welding Processes - 541.2 Aluminum Alloys - 542.2 Magnesium and Alloys - 546.3 Zinc and Alloys - 901.3 Engineering Research - 951 Materials Science |
引用统计 | 无
|
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/114170 |
专题 | 材料科学与工程学院 |
通讯作者 | Jin Yu-hua |
作者单位 | Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Gansu, Peoples R China |
第一作者单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
第一作者的第一单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
推荐引用方式 GB/T 7714 | Jin Yu-hua,Gan Rui-gen,Chen Fei,et al. Friction Stir Welding-assisted Diffusion Bond of Al/Zn/Mg Lap Joint[J]. Cailiao Gongcheng/Journal of Materials Engineering,2018,46(3):55-60. |
APA | Jin Yu-hua,Gan Rui-gen,Chen Fei,Shao Qing-feng,Wang Xi-jing,&Guo Ting-biao.(2018).Friction Stir Welding-assisted Diffusion Bond of Al/Zn/Mg Lap Joint.Cailiao Gongcheng/Journal of Materials Engineering,46(3),55-60. |
MLA | Jin Yu-hua,et al."Friction Stir Welding-assisted Diffusion Bond of Al/Zn/Mg Lap Joint".Cailiao Gongcheng/Journal of Materials Engineering 46.3(2018):55-60. |
条目包含的文件 | 条目无相关文件。 |
个性服务 |
查看访问统计 |
谷歌学术 |
谷歌学术中相似的文章 |
[Jin Yu-hua]的文章 |
[Gan Rui-gen]的文章 |
[Chen Fei]的文章 |
百度学术 |
百度学术中相似的文章 |
[Jin Yu-hua]的文章 |
[Gan Rui-gen]的文章 |
[Chen Fei]的文章 |
必应学术 |
必应学术中相似的文章 |
[Jin Yu-hua]的文章 |
[Gan Rui-gen]的文章 |
[Chen Fei]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论