Institutional Repository of Coll Mat Sci & Engn
Method to measure three dimensional specular surface of TIG weld pool based on dot-matrix laser pattern | |
Zhang, Gang1![]() ![]() ![]() ![]() | |
2014-12-20 | |
发表期刊 | Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
![]() |
ISSN | 05776686 |
卷号 | 50期号:24页码:10-16 |
摘要 | Measuring three dimensional (3D) weld pool surface of tungsten inert gas arc welding (TIG) has significance for investigating coupled mechanism between welding arc and weld pool, control of weld formation and weld joint penetration. However, the influence of strong arc light and the specular reflection of weld pool surface make the existed methods hardly applied to 3D measurement. To this end, a new sensing method is proposed, which utilizes the reflected property of weld pool surface. The mapping model between reflected and projected laser dots is analyzed and established. A new 3D reconstructed algorithm is proposed based on the renewed projected laser dots and the 3D TIG weld pool surface is achieved, also its geometry parameters, i.e., width and average height are extracted. Compared the measurement shows that the proposed method can measure the dynamical variation of weld pool surface, but also the reconstructed result coincides with the measurement well. The error of weld pool's width and height is 1.73% and 2.32%, respectively. To better investigate the evolution rule of TIG weld pool specular surface provides a new method. © 2014 Journal of Mechanical Engineering. |
关键词 | Electric welding Inert gases Free surfaces Geometry parameter Laser dot matrixes Specular reflections Three-dimensional measurements Threedimensional (3-d) Tungsten inert-gas arc welding Weld pool surfaces |
DOI | 10.3901/JME.2014.24.010 |
收录类别 | EI |
语种 | 中文 |
出版者 | Editorial Office of Chinese Journal of Mechanical Engineering |
EI入藏号 | 20150500481993 |
EI主题词 | Welds |
EI分类号 | 538.2 Welding - 538.2.1 Welding Processes - 804.2 Inorganic Compounds |
来源库 | Compendex |
分类代码 | 538.2 Welding - 538.2.1 Welding Processes - 804.2 Inorganic Compounds |
引用统计 | 无
|
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/113514 |
专题 | 材料科学与工程学院 省部共建有色金属先进加工与再利用国家重点实验室 |
作者单位 | 1.State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals,Lanzhou University of Technology, Lanzhou; 730050, China; 2.Center for Manufacturing, University of Kentucky, Lexington; 40506, United States |
第一作者单位 | 兰州理工大学 |
第一作者的第一单位 | 兰州理工大学 |
推荐引用方式 GB/T 7714 | Zhang, Gang,Shi, Yu,Huang, Jiankang,et al. Method to measure three dimensional specular surface of TIG weld pool based on dot-matrix laser pattern[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2014,50(24):10-16. |
APA | Zhang, Gang,Shi, Yu,Huang, Jiankang,Zhang, Weijie,&Fan, Ding.(2014).Method to measure three dimensional specular surface of TIG weld pool based on dot-matrix laser pattern.Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,50(24),10-16. |
MLA | Zhang, Gang,et al."Method to measure three dimensional specular surface of TIG weld pool based on dot-matrix laser pattern".Jixie Gongcheng Xuebao/Journal of Mechanical Engineering 50.24(2014):10-16. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论