Coating forming by electrical explosion spraying of WC powder in the constraining tube

	Coating forming by electrical explosion spraying of WC powder in the constraining tube
	Zhu Liang; Shi Maohu; Wang Yong
	2014-04-01
发表期刊	Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
ISSN	1002185X
卷号	43 期号:4 页码:968-972
摘要	By means of powder electrical explosion spraying of continuously carrying powder with pressure-sensitive adhesive, WC coating was prepared. The effects of initial voltage and the cross-sectional area of jet chamber on the forming of coating were analyzed. The result shows that in the distance of 3~7 mm, hybrid coating is formed which consists of a surface for liquid spraying coating and a bottom for vapor deposition coating. When raising the initial voltage within minor cross-sectional area of jet chamber, the temperature and the velocity of the blast area can be increased to raise vapor share. It is thought that vapor deposition coating is formed preferentially and combined with substrate densely. Residual droplets spurt is lagged, and liquid spraying coating is formed which covers the vapor deposition coating. © 2014, Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.
关键词	Adhesives Liquids Vapor deposition Cross sectional area Deposition coating Electrical explosion Electrical explosion spraying Hybrid coating Initial voltages Liquid spraying Pressure sensitive adhesives the constraining tube electrical explosion liquid spraying coating vapor deposition coating
收录类别	EI ; SCIE ; SCI
语种	中文
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000335487800041
出版者	Rare Metals Materials and Engineering Press
EI入藏号	20142117743000
EI主题词	Coatings
EI分类号	813.2 Coating Materials
来源库	Compendex
分类代码	813.2 Coating Materials
引用统计	被引频次：3[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	https://ir.lut.edu.cn/handle/2XXMBERH/113022
专题	省部共建有色金属先进加工与再利用国家重点实验室材料科学与工程学院设计艺术学院
通讯作者	Zhu Liang
作者单位	Lanzhou Univ Technol, State Key Lab Gansu Adv Nonferrous Met Mat, Lanzhou 730050, Peoples R China
第一作者单位	省部共建有色金属先进加工与再利用国家重点实验室
通讯作者单位	省部共建有色金属先进加工与再利用国家重点实验室
第一作者的第一单位	省部共建有色金属先进加工与再利用国家重点实验室
推荐引用方式 GB/T 7714	Zhu Liang,Shi Maohu,Wang Yong. Coating forming by electrical explosion spraying of WC powder in the constraining tube[J]. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering,2014,43(4):968-972.
APA	Zhu Liang,Shi Maohu,&Wang Yong.(2014).Coating forming by electrical explosion spraying of WC powder in the constraining tube.Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering,43(4),968-972.
MLA	Zhu Liang,et al."Coating forming by electrical explosion spraying of WC powder in the constraining tube".Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering 43.4(2014):968-972.