Institutional Repository of Coll Mat Sci & Engn
Measurement of characteristic parameters of three dimensional weld pool surface in tungsten inert gas arc welding based on laser-vision | |
Zhang, Gang![]() ![]() ![]() ![]() ![]() | |
2015-03-28 | |
发表期刊 | Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University
![]() |
ISSN | 10062467 |
卷号 | 49期号:3页码:301-305 |
摘要 | Aimed at the problems in measuring the three dimensional weld pool surface in tungsten inert gas arc welding in existing methods, which are hardly applied in the strong arc light, high temperature radiations and specular refection. A novel method named laser-vision was developed, and the measurement system was established. The experiments with laser dot matrix and parallel lines pattern were performed and the reflected laser distorted images were captured by a high speed camera. The reflected laser dot coordinate and its transfer model between projected laser dot coordinate were extracted and established, respectively. The geometric parameters of the weld pool surface were obtained offline. The comparison of the extracted and measured result shows that the proposed method can successfully measure the three dimensional information of the weld pool surface and the extracted results coincide with the actual measurement well. The error of width, length and convexity is 0.8%, 0.6% and 4.7%, respectively. This paper provides a new method for control of 3D weld pool surface in real-time. ©, 2015, Shanghai Jiao Tong University. All right reserved. |
关键词 | Gas metal arc welding High speed cameras Inert gases Tungsten Welds Actual measurements Characteristic parameters Free surfaces Laser dot matrixes Laser vision Three-dimensional information Tungsten inert-gas arc welding Weld pool surfaces |
DOI | 10.16183/j.cnki.jsjtu.2015.03.003 |
收录类别 | EI |
语种 | 中文 |
出版者 | Shanghai Jiao Tong University, 2200 Xietu Rd no.25,, Shanghai, 200032, China |
EI入藏号 | 20151800809763 |
EI主题词 | Inert gas welding |
EI分类号 | 538.2 Welding - 538.2.1 Welding Processes - 543.5 Tungsten and Alloys - 742.2 Photographic Equipment - 804.2 Inorganic Compounds |
来源库 | Compendex |
分类代码 | 538.2 Welding - 538.2.1 Welding Processes - 543.5 Tungsten and Alloys - 742.2 Photographic Equipment - 804.2 Inorganic Compounds |
引用统计 | 无
|
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/112432 |
专题 | 材料科学与工程学院 省部共建有色金属先进加工与再利用国家重点实验室 |
作者单位 | State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou; 730050, China |
第一作者单位 | 兰州理工大学 |
第一作者的第一单位 | 兰州理工大学 |
推荐引用方式 GB/T 7714 | Zhang, Gang,Shi, Yu,Li, Chun-Kai,et al. Measurement of characteristic parameters of three dimensional weld pool surface in tungsten inert gas arc welding based on laser-vision[J]. Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University,2015,49(3):301-305. |
APA | Zhang, Gang,Shi, Yu,Li, Chun-Kai,Fan, Ding,&Huang, Jian-Kang.(2015).Measurement of characteristic parameters of three dimensional weld pool surface in tungsten inert gas arc welding based on laser-vision.Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University,49(3),301-305. |
MLA | Zhang, Gang,et al."Measurement of characteristic parameters of three dimensional weld pool surface in tungsten inert gas arc welding based on laser-vision".Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University 49.3(2015):301-305. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论