Institutional Repository of Coll Mat Sci & Engn
On friction and wear behavior of Fe-based bulk amorphous alloy | |
Xiao, Hua-Xing1,2; Chen, Guang1; La, Pei-Qing3![]() | |
2006-03-01 | |
发表期刊 | Mocaxue Xuebao/Tribology
![]() |
ISSN | 10040595 |
卷号 | 26期号:2页码:140-144 |
摘要 | A Fe-based bulk amorphous alloy was prepared using arc melting and copper mold suction casting. Ballon-disc friction and wear test was carried out in dry sliding condition. Friction and wear behavior of cast Fe-based bulk amorphous alloy and the influence of heat treatments on its wear resistance were investigated. Worn surface morphologies of the samples were observed on a scanning electron microscope, and the wear mechanism of Fe-based bulk amorphous alloy and the crystal alloys with same element as the previous amorphous alloy was analyzed. No significant influence of the alloys' structure and mechanical performance on friction coefficient of the system was observed. A typical fatigue wear characteristic can be found for the cast and different heat treatment states of the Fe-based bulk amorphous alloy, whose wear resistance is higher than that of the crystal alloys with same element. Heat treatment can effectively enhance the wear resistance of cast Fe-based bulk amorphous alloy. |
关键词 | Amorphous alloys Fatigue of materials Friction Heat treatment Scanning electron microscopy Wear resistance Arc melting Copper mold suction casting Dry friction Fatigue wear characteristic Fe-based bulk amorphous alloy Worn surface morphologies |
收录类别 | EI |
语种 | 中文 |
出版者 | Science Press |
EI入藏号 | 2006249938271 |
EI主题词 | Iron alloys |
EI分类号 | 537.1 Heat Treatment Processes - 545.2 Iron Alloys - 931.1 Mechanics - 931.2 Physical Properties of Gases, Liquids and Solids - 933.2 Amorphous Solids |
来源库 | Compendex |
分类代码 | 537.1 Heat Treatment Processes - 545.2 Iron Alloys - 931.1 Mechanics - 931.2 Physical Properties of Gases, Liquids and Solids - 933.2 Amorphous Solids |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/112115 |
专题 | 材料科学与工程学院 |
作者单位 | 1.Joint Laboratory of Nanostructured Materials and Technology, Nanjing University of Science and Technology, Nanjing 210094, China; 2.School of Mechanical and Electrical Engineering, Changzhou Institute of Technology, Changzhou 213002, China; 3.Lanzhou University of Technology, Lanzhou 730000, China |
推荐引用方式 GB/T 7714 | Xiao, Hua-Xing,Chen, Guang,La, Pei-Qing. On friction and wear behavior of Fe-based bulk amorphous alloy[J]. Mocaxue Xuebao/Tribology,2006,26(2):140-144. |
APA | Xiao, Hua-Xing,Chen, Guang,&La, Pei-Qing.(2006).On friction and wear behavior of Fe-based bulk amorphous alloy.Mocaxue Xuebao/Tribology,26(2),140-144. |
MLA | Xiao, Hua-Xing,et al."On friction and wear behavior of Fe-based bulk amorphous alloy".Mocaxue Xuebao/Tribology 26.2(2006):140-144. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论