Lanzhou University of Technology Institutional Repository (LUT_IR)
Laser surface alloying of ZM5 Mg alloy with nano-SiC powder | |
Chen, C-J.1,2; Zhang, M.2; Chang, Q-M.2; Zhang, S-C.2; Ma, H-Y.3 | |
2010 | |
发表期刊 | Lasers in Engineering |
ISSN | 08981507 |
卷号 | 20期号:5-6页码:297-309 |
摘要 | The aim of this work was to improve the surface layer of a cast Mg alloy (ZM5) by means of laser surface treatment; namely the laser surface alloying (LSA) of nano-SiC powder onto the ZM5 Mg alloy surface using a pulsed Nd:YAG laser. The microstructure, chemical composition and microhardness of the alloyed layer were determined using scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis and microhardness testing, respectively. It was shown that laser surface alloying produced a relatively smooth, crack-free and hard surface layer. The interface between the alloyed layer and the substrate showed a good metallurgical joint. The hardness of the surface layer was increased significantly over the base ZM5 Mg alloy due to the formation of dispersive hard particles of SiC and the effect of refinement of the alloyed microstructure. © 2010 Old City Publishing, Inc. |
关键词 | Alloying Chemical analysis Hardness Microhardness Microstructure Neodymium lasers Pulsed lasers Scanning electron microscopy Silicon alloys Silicon carbide Surface treatment Yttrium aluminum garnet Chemical compositions Energy dispersive x-ray Laser surface alloying Laser surface treatment Mg alloy surfaces Microhardness testing Nano-SiC Pulsed Nd:YAG laser |
收录类别 | EI |
语种 | 英语 |
WOS研究方向 | Materials Science ; Optics |
WOS类目 | Materials Science, Multidisciplinary ; Optics |
WOS记录号 | WOS:000285367200003 |
出版者 | Old City Publishing, 628 North 2nd Street, Philadelphia, PA 19123, United States |
EI入藏号 | 20112514078664 |
EI主题词 | Magnesium alloys |
EI分类号 | 531.1 Metallurgy - 549.2 Alkaline Earth Metals - 549.3 Nonferrous Metals and Alloys excluding Alkali and Alkaline Earth Metals - 744.1 Lasers, General - 744.4 Solid State Lasers - 804.2 Inorganic Compounds - 951 Materials Science |
来源库 | Compendex |
分类代码 | 531.1 Metallurgy - 549.2 Alkaline Earth Metals - 549.3 Nonferrous Metals and Alloys excluding Alkali and Alkaline Earth Metals - 744.1 Lasers, General - 744.4 Solid State Lasers - 804.2 Inorganic Compounds - 951 Materials Science |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/112056 |
专题 | 兰州理工大学 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者 | Chen, C-J. |
作者单位 | 1.Lanzhou Univ Technol, State Key Lab Gansu Adv Nonferrous Met Mat, Lanzhou 730050, Peoples R China; 2.Wuhan Univ Sci & Technol, Laser Proc Res Ctr, Minist Educ, Key Lab Ferrous Met & Resources Utilizat, Wuhan 430081, Peoples R China; 3.Shenyang Inst Aeronaut Engn, Dept Mat Engn, Shenyang 110034, Peoples R China |
第一作者单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
第一作者的第一单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
推荐引用方式 GB/T 7714 | Chen, C-J.,Zhang, M.,Chang, Q-M.,et al. Laser surface alloying of ZM5 Mg alloy with nano-SiC powder[J]. Lasers in Engineering,2010,20(5-6):297-309. |
APA | Chen, C-J.,Zhang, M.,Chang, Q-M.,Zhang, S-C.,&Ma, H-Y..(2010).Laser surface alloying of ZM5 Mg alloy with nano-SiC powder.Lasers in Engineering,20(5-6),297-309. |
MLA | Chen, C-J.,et al."Laser surface alloying of ZM5 Mg alloy with nano-SiC powder".Lasers in Engineering 20.5-6(2010):297-309. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论