Institutional Repository of Coll Mat Sci & Engn
Microstructure analysis of large cross-section cast aluminum-steel friction welded joints | |
Wang, Xijing![]() ![]() | |
2010-02-01 | |
发表期刊 | Hanjie Xuebao/Transactions of the China Welding Institution
![]() |
ISSN | 0253360X |
卷号 | 31期号:2页码:29-32 |
摘要 | Welding test for large cross-section cast aluminum and cast steel (dissimilar metals) by continuous drive friction welding technology was conducted. By means of electron microprobe, transmission electron microscopy, X-ray diffraction analysis and micro-hardness testing, the welded joints between cast aluminum and steel were analysed. The results show that the joints between the large cross-section cast aluminum and steel has a good friction weld ability, the main elements diffuse to the dual surface from the interface which is as the starting point, diffusion distance of iron atoms is slightly less than that of aluminum atoms, carbon is induced by secondary friction face to form carbide, not only crystal but also amorphous exist in the weld zone, and the hardness on both sides of weld joint zone is slightly higher than that of the substrate. |
关键词 | Carbides Cast iron Dissimilar metals Electron probe microanalysis Friction Friction welding High resolution transmission electron microscopy Microanalysis Microhardness Steel testing Welded steel structures Welds X ray powder diffraction Aluminum atoms Cast aluminum Diffusion distance Electron microprobes Large cross-sections Microstructure analysis Surface from Welding technology |
收录类别 | EI |
语种 | 中文 |
出版者 | Harbin Research Institute of Welding |
EI入藏号 | 20101712896680 |
EI主题词 | Steel castings |
EI分类号 | 531 Metallurgy and Metallography - 531.2 Metallography - 538.2 Welding - 538.2.1 Welding Processes - 545.2 Iron Alloys - 545.3 Steel - 741.3 Optical Devices and Systems - 801 Chemistry - 804.2 Inorganic Compounds - 951 Materials Science |
来源库 | Compendex |
分类代码 | 531 Metallurgy and Metallography - 538.2 Welding - 538.2.1 Welding Processes - 545.2 Iron Alloys - 545.3 Steel - 741.3 Optical Devices and Systems - 801 Chemistry - 804.2 Inorganic Compounds - 951 Materials Science |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/111413 |
专题 | 材料科学与工程学院 |
作者单位 | State Key Laboratory of Advanced New Non-ferrous Materials, Gansu Province, Lanzhou University of Technology, Lanzhou 730050, China |
第一作者单位 | 兰州理工大学 |
第一作者的第一单位 | 兰州理工大学 |
推荐引用方式 GB/T 7714 | Wang, Xijing,Shang, Xianwei,Zhi, Lili,et al. Microstructure analysis of large cross-section cast aluminum-steel friction welded joints[J]. Hanjie Xuebao/Transactions of the China Welding Institution,2010,31(2):29-32. |
APA | Wang, Xijing,Shang, Xianwei,Zhi, Lili,&Zhang, Changqing.(2010).Microstructure analysis of large cross-section cast aluminum-steel friction welded joints.Hanjie Xuebao/Transactions of the China Welding Institution,31(2),29-32. |
MLA | Wang, Xijing,et al."Microstructure analysis of large cross-section cast aluminum-steel friction welded joints".Hanjie Xuebao/Transactions of the China Welding Institution 31.2(2010):29-32. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论