Gas discharge of segmented metal wire electrical explosion

	Gas discharge of segmented metal wire electrical explosion
	Bi, Xue-Song; Zhu, Liang
	2010-05-01
发表期刊	Gaodianya Jishu/High Voltage Engineering
ISSN	10036520
卷号	36 期号:5 页码:1264-1268
摘要	Segmented metal wire electrical explosion was influenced by process variables such as the initial charging voltage, the electrode spacing and the breakdown gap length. For understanding their relation completely, electrical explosion was tested with variations of the voltages of electrical field and the lengths of the segmented wires, the discharge current was measured simultaneously. Results show that, when the segmented metal wire fell into the high voltage field, single air-gap discharge and the double air-gap discharge are two forms of gas discharge during the wire electrical explosion. The breakdown voltage of the single air-gap discharge was lower than that of the double air-gap discharge. The breakdown voltage of air gap increases with the electrode spacing increasing. The optimum length of the segmented wire for the electrical explosion, is the minimum length when the double air-gap discharge can occur.
关键词	Electric breakdown Electrodes Explosions Glow discharges Partial discharges Thermal spraying Air-gap discharges Discharge currents Electric field intensities Electrical explosion Electrode spacing Gas discharge Process Variables Wire electrical explosions
收录类别	EI
语种	中文
出版者	Science Press
EI入藏号	20102513030923
EI主题词	Wire
EI分类号	535.2 Metal Forming - 701.1 Electricity: Basic Concepts and Phenomena - 813.1 Coating Techniques
来源库	Compendex
分类代码	535.2 Metal Forming - 701.1 Electricity: Basic Concepts and Phenomena - 813.1 Coating Techniques
文献类型	期刊论文
条目标识符	https://ir.lut.edu.cn/handle/2XXMBERH/111147
专题	省部共建有色金属先进加工与再利用国家重点实验室材料科学与工程学院
作者单位	State Key Laboratory of Gansu Advanced Non-Ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China
第一作者单位	省部共建有色金属先进加工与再利用国家重点实验室
第一作者的第一单位	省部共建有色金属先进加工与再利用国家重点实验室
推荐引用方式 GB/T 7714	Bi, Xue-Song,Zhu, Liang. Gas discharge of segmented metal wire electrical explosion[J]. Gaodianya Jishu/High Voltage Engineering,2010,36(5):1264-1268.
APA	Bi, Xue-Song,&Zhu, Liang.(2010).Gas discharge of segmented metal wire electrical explosion.Gaodianya Jishu/High Voltage Engineering,36(5),1264-1268.
MLA	Bi, Xue-Song,et al."Gas discharge of segmented metal wire electrical explosion".Gaodianya Jishu/High Voltage Engineering 36.5(2010):1264-1268.