Research on rheological properties and extrusion behavior of aqueous alumina paste in paste-extrusion-based SFF processes | |
Liu, Hongjun; Li, Yamin; Li, Dongjian | |
2016-04-01 | |
发表期刊 | International Journal of Advanced Manufacturing Technology |
ISSN | 02683768 |
卷号 | 83期号:9-12页码:2039-2047 |
摘要 | In this work, the rheological properties and extrusion behavior of aqueous alumina paste which can be used in paste-extrusion-based solid freeform fabrication (SFF) processes are presented. According to the analysis of dynamic viscoelastic properties, the aqueous alumina paste with solid loading of 50 vol% can be treated as a viscous–elastic–plastic body in the extrusion process. The paste shows the viscoelastic feature before yielding and viscoplastic feature after yielding. Although the paste possesses shear-thinning behavior, it can be extruded steadily due to relatively steady apparent viscosity within the range of shearing rate in the actual paste extrusion process. The ram extrusion experiments show that the variation of extrusion pressure is essentially determined by the rheological behavior of paste. The average extrusion pressure in steady extrusion stage can be estimated by Benbow–Bridgwater model. However, there exists a ram velocity threshold (0.1 mm/s in this study) below which the liquid phase migration will be significant and the extrusion pressure is hardly estimated. Due to the viscoplastic fluid feature of paste, the extrudate velocity cannot immediately reach to the expected value when paste extrusion starts and stops, and it could result in the imprecise deposition and "die drooling," which can be improved by the operation of pulling back of ram. © 2015, Springer-Verlag London. |
关键词 | Alumina Aluminum oxide Layered manufacturing Rheology Shear thinning Viscoelasticity Aqueous alumina Dynamic viscoelastic properties Extrusion pressure Rheological behaviors Rheological property Shear-thinning behavior Solid free-form fabrication Viscoplastic fluid |
DOI | 10.1007/s00170-015-7720-z |
收录类别 | EI ; SCIE |
语种 | 英语 |
WOS研究方向 | Automation & Control Systems ; Engineering |
WOS类目 | Automation & Control Systems ; Engineering, Manufacturing |
WOS记录号 | WOS:000373156000050 |
出版者 | Springer London |
EI入藏号 | 20153501209283 |
EI主题词 | Extrusion |
EI分类号 | 631.1 Fluid Flow, General ; 804.2 Inorganic Compounds ; 913.4 Manufacturing ; 931.1 Mechanics ; 931.2 Physical Properties of Gases, Liquids and Solids |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/150349 |
专题 | 国际教育学院 材料科学与工程学院 |
通讯作者 | Liu, Hongjun |
作者单位 | Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, 287 Langongping Rd, Lanzhou 730050, Gansu, Peoples R China |
第一作者单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
第一作者的第一单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
推荐引用方式 GB/T 7714 | Liu, Hongjun,Li, Yamin,Li, Dongjian. Research on rheological properties and extrusion behavior of aqueous alumina paste in paste-extrusion-based SFF processes[J]. International Journal of Advanced Manufacturing Technology,2016,83(9-12):2039-2047. |
APA | Liu, Hongjun,Li, Yamin,&Li, Dongjian.(2016).Research on rheological properties and extrusion behavior of aqueous alumina paste in paste-extrusion-based SFF processes.International Journal of Advanced Manufacturing Technology,83(9-12),2039-2047. |
MLA | Liu, Hongjun,et al."Research on rheological properties and extrusion behavior of aqueous alumina paste in paste-extrusion-based SFF processes".International Journal of Advanced Manufacturing Technology 83.9-12(2016):2039-2047. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论