Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction

doi:10.1142/S0217984921505102

	Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction
	Zheng, Yuehong; Zhao, He; Zhu, Sijia; La, Peiqing; Zhan, Faqi; Zhu, Min; Sheng, Jie; Liu, Haibin
	2021-12-10
发表期刊	MODERN PHYSICS LETTERS B
ISSN	0217-9849
卷号	35 期号:34
摘要	The metallic element Mo has almost no solid solubility in copper and can be used as a nucleation particle to refine the grain size and increase the recrystallization temperature of the alloy during solidification. It is expected to obtain copper alloys with good comprehensive properties by reasonably controlling the addition amount of Mo. However, it is difficult to prepare Cu-Mo alloys with uniform structure and there are few related literatures. In this paper, the aluminothermic reaction method, which has the advantages of simple process, low cost, and large size of the prepared alloy, was adopted, and a cluster model with the atomic ratio of Mo and Ni of 1:12 was introduced to design the alloy composition. Here, five alloys with different copper contents were prepared and followed by room temperature rolling with 40%, 60%, and 80% deformation. The results show that the as-cast Cu-Ni-Mo alloys exhibit good formability, have no macroscopic defects and present a small amount of precipitates. With the increase of alloy elements Ni and Mo, the hardness and strength of the alloys increase obviously, while the electrical conductivity decreases gradually. For the rolled alloys, a large number of lamellar deformed structures are formed, the grains are obviously refined, the precipitated phases are broken and the distribution is more uniform, thus the strength and hardness of the alloy increase significantly, the plasticity decrease significantly, while the conductivity changed little. In this study, high-strength samples were obtained, which may be a valuable exploration for the preparation of Cu-Ni-Mo alloy sheets with excellent microstructure and mechanical properties.
关键词	Aluminothermic reaction copper alloy rolling mechanical property conductivity
DOI	10.1142/S0217984921505102
收录类别	SCIE
语种	英语
WOS研究方向	Physics
WOS类目	Physics, Applied ; Physics, Condensed Matter ; Physics, Mathematical
WOS记录号	WOS:000725602400012
出版者	WORLD SCIENTIFIC PUBL CO PTE LTD
来源库	WOS
引用统计	被引频次[WOS]：0 [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	https://ir.lut.edu.cn/handle/2XXMBERH/150008
专题	省部共建有色金属先进加工与再利用国家重点实验室材料科学与工程学院学科建设与学位办公室
通讯作者	Zheng, Yuehong
作者单位	Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China
第一作者单位	省部共建有色金属先进加工与再利用国家重点实验室
通讯作者单位	省部共建有色金属先进加工与再利用国家重点实验室
第一作者的第一单位	省部共建有色金属先进加工与再利用国家重点实验室
推荐引用方式 GB/T 7714	Zheng, Yuehong,Zhao, He,Zhu, Sijia,et al. Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction[J]. MODERN PHYSICS LETTERS B,2021,35(34).
APA	Zheng, Yuehong.,Zhao, He.,Zhu, Sijia.,La, Peiqing.,Zhan, Faqi.,...&Liu, Haibin.(2021).Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction.MODERN PHYSICS LETTERS B,35(34).
MLA	Zheng, Yuehong,et al."Effect of rolling deformation on microstructure and properties of Cu-Ni-Mo alloy prepared by aluminothermic reaction".MODERN PHYSICS LETTERS B 35.34(2021).

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Zheng-2021-Effect of（4757KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载