Microstructure and tribological behaviors of diffusion bonded powder sintered Cu-Sn based alloys
Li, Zhenyu1,2; Zhao, Gengrui1; Wang, Honggang1; Gao, Gui1; Chen, Shengsheng1; Yang, Dongya2; Fan, Yue3; Zhang, Guowei4; Xu, Hong4
2021-11
发表期刊MATERIALS RESEARCH EXPRESS
卷号8期号:11
摘要Owing to good self-lubricating performance, tin bronze is widely used in industrial fields. As tin bronze parts manufactured by powder metallurgy, their tribological performances are influenced by raw powder. In this work, four types of self-lubricating copper alloy composites (CuSn10 (D), CuSn10, CuSn10Pb10 (D) and CuSn10Pb10) were prepared by sintering completely alloyed powder and diffusion alloyed copper tin powder. The morphology, element distribution and microstructure of raw powder and their sintered Cu alloy composites were observed. The tribological properties of Cu alloys were investigated by block-ring friction test under different working conditions and their worn surface and wear debris were analyzed. The results show that the diffusion alloyed powder has an irregular dendritic morphology and its sintered Cu alloy is more likely to produce twin structure which enhances the hardness and the bearing capacity of the material. Compared with completely alloyed powder sintered CuSn10 sample, the wear rate of CuSn10 (D) sintered from diffusion alloyed powder was reduced by 83.96%, 74.39%, and 67.63% under three typical working conditions. Under dry friction conditions, the wear rate of CuSn10 (D) is reduced by 63.64% than CuSn10, and CuSn10Pb10 (D) is 25% lower than CuSn10Pb10. The investigation on the wear tracks and wear debris of Cu alloy composites showed that the diffusion alloyed powder sintered samples are inclined to form a more consecutive and integral third-body layer on wear tracks and which contributes to the better wear resistance.
关键词Cu alloy diffusion alloyed powder friction and wear third-body layer
DOI10.1088/2053-1591/ac31ff
收录类别SCIE
语种英语
WOS研究方向Materials Science
WOS类目Materials Science, Multidisciplinary
WOS记录号WOS:000716748500001
出版者IOP Publishing Ltd
来源库WOS
引用统计
被引频次:2[WOS]   [WOS记录]     [WOS相关记录]
文献类型期刊论文
条目标识符https://ir.lut.edu.cn/handle/2XXMBERH/149977
专题马克思主义学院
机电工程学院
通讯作者Zhao, Gengrui; Gao, Gui; Chen, Shengsheng
作者单位1.Chinese Acad Sci, Lanzhou Inst Chem Phys, Key Lab Sci & Technol Wear & Protect Mat, Lanzhou 730000, Gansu, Peoples R China;
2.Lanzhou Univ Technol, Sch Mech & Elect Engn, Lanzhou 730050, Gansu, Peoples R China;
3.Changchun Equipment Technol Res Inst, Changchun 130012, Jilin, Peoples R China;
4.North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Shanxi, Peoples R China
第一作者单位兰州理工大学
推荐引用方式
GB/T 7714
Li, Zhenyu,Zhao, Gengrui,Wang, Honggang,et al. Microstructure and tribological behaviors of diffusion bonded powder sintered Cu-Sn based alloys[J]. MATERIALS RESEARCH EXPRESS,2021,8(11).
APA Li, Zhenyu.,Zhao, Gengrui.,Wang, Honggang.,Gao, Gui.,Chen, Shengsheng.,...&Xu, Hong.(2021).Microstructure and tribological behaviors of diffusion bonded powder sintered Cu-Sn based alloys.MATERIALS RESEARCH EXPRESS,8(11).
MLA Li, Zhenyu,et al."Microstructure and tribological behaviors of diffusion bonded powder sintered Cu-Sn based alloys".MATERIALS RESEARCH EXPRESS 8.11(2021).
条目包含的文件
条目无相关文件。
个性服务
查看访问统计
谷歌学术
谷歌学术中相似的文章
[Li, Zhenyu]的文章
[Zhao, Gengrui]的文章
[Wang, Honggang]的文章
百度学术
百度学术中相似的文章
[Li, Zhenyu]的文章
[Zhao, Gengrui]的文章
[Wang, Honggang]的文章
必应学术
必应学术中相似的文章
[Li, Zhenyu]的文章
[Zhao, Gengrui]的文章
[Wang, Honggang]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。