Institutional Repository of Coll Mat Sci & Engn
Study on tensile properties of friction-stir-welded joints of 2024-M aluminum alloy | |
Jin, Yuhua; Wang, Xijing; Li, Changfeng; Zhang, Jie | |
2009-04-01 | |
发表期刊 | Hanjie Xuebao/Transactions of the China Welding Institution |
ISSN | 0253360X |
卷号 | 30期号:4页码:69-72 |
摘要 | In this paper, the effect of stiring pin rotation speed on mechanical properties of 2024-M joints of friction stir welding was analysed. The results showed that the fracture position of 2024-M joints varied with the rotation speed of stiring pin in the axial tensile experiment. A larger percent of block particles were reserved in the nugget zone with higher rotation speed, the properties of welding joints decreased and the fracture occured in stir zone. With lower rotational speed, the proportion of friction mechanism between the shoulder and top surface of welded material decreased. The layered metal flow was obtained at the rotational and traverse speeds of 600 r/min and 20 mm/min respectively, and it can become lower for welding joints again. The optimal welding parameters were the rotational and traverse speeds of 800-1200 r/min and 20 mm/min respectively. Tensile fracture surface inclined at 45 to stress axis in base metal region, which is a shear fracture. |
关键词 | Aluminum alloys Fracture Friction Mechanical properties Speed Tensile strength Fracture analysis Fracture position Friction mechanism Friction stir Friction stir welded joints Rotational speed Tensile fracture surfaces Welded materials |
收录类别 | EI |
语种 | 中文 |
出版者 | Harbin Research Institute of Welding |
EI入藏号 | 20092012082814 |
EI主题词 | Friction stir welding |
EI分类号 | 538.2.1 Welding Processes - 541.2 Aluminum Alloys - 951 Materials Science |
来源库 | Compendex |
分类代码 | 538.2.1 Welding Processes - 541.2 Aluminum Alloys - 951 Materials Science |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/111644 |
专题 | 材料科学与工程学院 机电工程学院 |
作者单位 | State Key Laboratory of Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China |
第一作者单位 | 兰州理工大学 |
第一作者的第一单位 | 兰州理工大学 |
推荐引用方式 GB/T 7714 | Jin, Yuhua,Wang, Xijing,Li, Changfeng,et al. Study on tensile properties of friction-stir-welded joints of 2024-M aluminum alloy[J]. Hanjie Xuebao/Transactions of the China Welding Institution,2009,30(4):69-72. |
APA | Jin, Yuhua,Wang, Xijing,Li, Changfeng,&Zhang, Jie.(2009).Study on tensile properties of friction-stir-welded joints of 2024-M aluminum alloy.Hanjie Xuebao/Transactions of the China Welding Institution,30(4),69-72. |
MLA | Jin, Yuhua,et al."Study on tensile properties of friction-stir-welded joints of 2024-M aluminum alloy".Hanjie Xuebao/Transactions of the China Welding Institution 30.4(2009):69-72. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论