Lanzhou University of Technology Institutional Repository (LUT_IR)
Effects of Cu addition on microstructure and mechanical properties of as-cast Mg-6Zn magnesium alloy | |
Zhang, Yu; Huang, Xiao-feng; Ma, Ying; Chen, Ti-jun; Li, Yuan-dong; Hao, Yuan | |
2017-07 | |
发表期刊 | CHINA FOUNDRY |
ISSN | 1672-6421 |
卷号 | 14期号:4页码:251-257 |
摘要 | The application of Mg-Zn binary alloys is restricted due to their developed dendritic microstructure and poor mechanical properties. In this study, an alloying method was used to improve the mechanical properties of Mg-Zn alloy. The Mg-6Zn magnesium alloys microalloyed with varying Cu content (0, 0.8, 1.5, 2.0 and 2.5wt.%) were fabricated by permanent mould casting, and the effects of Cu content on the microstructure and mechanical properties of as-cast Mg-6Zn alloys were studied using OM, SEM, XRD and tensile tests at room temperature. The obtained results show that the addition of Cu not only can refine the grains effectively, but also can modify the eutectic morphology and improve the mechanical properties of the alloys. The main phases of the studied alloys include a-Mg, MgZn2, Mg2Cu and CuMgZn. When the content of Cu exceeds 0.8wt.%, Mg2Cu phase appears. Meanwhile, the eutectic morphology is modified into dendritic shape or lamellar structure, which has an adverse effect on the tensile properties. Furthermore, among the investigated alloys, the alloy containing 0.8% Cu shows an optimal ultimate tensile strength of 196 MPa, while the alloy with 1.5wt.% Cu obtains an excellent elongation of 7.22%. The experimental alloys under different Cu contents show distinguishing fracture behaviors: the fracture of the alloy with 0.8wt.% Cu reveals a mixed mode of inter-granular and quasi-cleavage, while in other investigated alloys, the fracture behaviors are dominated by cleavage fracture. |
关键词 | Mg-Zn magnesium alloy Cu addition microstructure mechanical property fracture mode |
DOI | 10.1007/s41230-017-6094-2 |
收录类别 | SCI ; SCIE |
语种 | 英语 |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
WOS类目 | Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:000411157400003 |
出版者 | FOUNDRY JOURNAL AGENCY |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/33201 |
专题 | 发展规划处 材料科学与工程学院 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者 | Huang, Xiao-feng |
作者单位 | Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Gansu, Peoples R China |
第一作者单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
第一作者的第一单位 | 省部共建有色金属先进加工与再利用国家重点实验室 |
推荐引用方式 GB/T 7714 | Zhang, Yu,Huang, Xiao-feng,Ma, Ying,et al. Effects of Cu addition on microstructure and mechanical properties of as-cast Mg-6Zn magnesium alloy[J]. CHINA FOUNDRY,2017,14(4):251-257. |
APA | Zhang, Yu,Huang, Xiao-feng,Ma, Ying,Chen, Ti-jun,Li, Yuan-dong,&Hao, Yuan.(2017).Effects of Cu addition on microstructure and mechanical properties of as-cast Mg-6Zn magnesium alloy.CHINA FOUNDRY,14(4),251-257. |
MLA | Zhang, Yu,et al."Effects of Cu addition on microstructure and mechanical properties of as-cast Mg-6Zn magnesium alloy".CHINA FOUNDRY 14.4(2017):251-257. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Zhang-2017-Effects o(2280KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论