Investigation on polishing of zirconia ceramics using magnetic compound fluid: Relationship between material removal and surface roughness | |
Feng, Ming1,2; Wang, Youliang3; Wu, Yongbo2 | |
2021-01 | |
发表期刊 | International Journal of Automation Technology |
ISSN | 1881-7629 |
卷号 | 15期号:1页码:17-23 |
摘要 | Zirconia ceramics have excellent applicability in the aerospace, defense, new energy, automotive, electronics, and biomedical fields. However, few investigations have been conducted on the high-precision polishing of zirconia ceramics. In this work, a polishing method using a magnetic compound fluid slurry is proposed. First, the principle and the constructed experimental setup were presented. Then, the experiments were performed that characterized the surface profile after polishing, the effect of the working gap, and the effect of the concentration of carbonyl iron particles (CIPs) on the material removal and surface quality. The results showed that the material removal ability correlated positively with the surface roughness; the smallest working gap (0.5 mm) induced greater material removal ability and better surface roughness; higher CIP concentration enabled a higher polishing force to obtain higher material removal and better surface quality. The polishing results show that surface roughness Rz of 55 nm was obtained at the surfaces of zirconia ceramics, confirming that the proposed method has the potential for polishing of zirconia ceramics. © 2021, Fuji Technology Press. All rights reserved. |
关键词 | Polishing Surface properties Zirconia Biomedical fields Carbonyl iron particles High-precision Magnetic compound fluids Material removal Polishing forces Surface profiles Zirconia ceramic |
DOI | 10.20965/IJAT.2021.P0017 |
收录类别 | EI ; ESCI |
语种 | 英语 |
WOS研究方向 | Automation & Control Systems |
WOS类目 | Automation & Control Systems |
WOS记录号 | WOS:000606509800003 |
出版者 | Fuji Technology Press |
EI入藏号 | 20210509839259 |
EI主题词 | Surface roughness |
EI分类号 | 604.2 Machining Operations ; 804.2 Inorganic Compounds ; 931.2 Physical Properties of Gases, Liquids and Solids |
来源库 | WOS |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/148373 |
专题 | 机电工程学院 |
通讯作者 | Feng, Ming |
作者单位 | 1.Wenzhou Univ, Coll Mech & Elect Engn, Wenzhou 325035, Zhejiang, Peoples R China; 2.Southern Univ Sci & Technol, Dept Mech & Energy Engn, Shenzhen, Peoples R China; 3.Lanzhou Univ Technol, Sch Mech & Elect Engn, Lanzhou, Peoples R China |
推荐引用方式 GB/T 7714 | Feng, Ming,Wang, Youliang,Wu, Yongbo. Investigation on polishing of zirconia ceramics using magnetic compound fluid: Relationship between material removal and surface roughness[J]. International Journal of Automation Technology,2021,15(1):17-23. |
APA | Feng, Ming,Wang, Youliang,&Wu, Yongbo.(2021).Investigation on polishing of zirconia ceramics using magnetic compound fluid: Relationship between material removal and surface roughness.International Journal of Automation Technology,15(1),17-23. |
MLA | Feng, Ming,et al."Investigation on polishing of zirconia ceramics using magnetic compound fluid: Relationship between material removal and surface roughness".International Journal of Automation Technology 15.1(2021):17-23. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论