Review on Joining Technology of Aluminum Alloy and Resin Matrix Composites

IR > 机电工程学院

	Review on Joining Technology of Aluminum Alloy and Resin Matrix Composites
	Wang Youliang1 ; Zhang Tao 2; Yu Weiyuan2,3 ; Zhang Wenjuan3
	2021-03
发表期刊	RARE METAL MATERIALS AND ENGINEERING
ISSN	1002-185X
卷号	50 期号:3 页码:753-761
摘要	The hybrid structures of metal-composites are widely used in the field of aerospace, marine and vehicle industry due to the advantages of high specific modulus and high specific strength of aluminum alloy and resin matrix composites. Therefore, the joining technology between metal and composites as one of the crucial factors in these industries has been paid more attention. In this research, the connection mechanism and influencing factors of the joining processes of resin matrix composites and aluminum alloy were reviewed. At present, bolt connection, rivet connection, adhesive bonding, injection molded direct joining and welding were studied for the connecting between aluminum alloy and resin matrix composites. The processes of bolt connection and rivet connection are simple, however, it is easy to produce the stress concentration around the hole. The cost of adhesive bonding is low, but the anti-impact and anti-stripping strengths of the interface are low. The production cycle in the process of injection molded direct joining is short, but the strength of the joint is also low. The degree of automation of the welding technology is high, however, the required equipment is expensive. Finally, the development direction of joining technology between aluminum alloy and resin matrix composites which can obtain the joints with high performance and high reliability is pointed out according to the current research results.
关键词	composites aluminum alloys processing technology strength connection
收录类别	SCIE ; CSCD ; SCOPUS ; EI
语种	英语
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000641439800004
出版者	NORTHWEST INST NONFERROUS METAL RESEARCH
EI入藏号	20211710250453
EI主题词	Aluminum alloys
EI分类号	408.2 Structural Members and Shapes - 531 Metallurgy and Metallography - 531.1 Metallurgy - 538.2 Welding - 541.2 Aluminum Alloys - 605 Small Tools and Hardware - 815.1.1 Organic Polymers
来源库	WOS
引用统计	被引频次[WOS]：0 [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	https://ir.lut.edu.cn/handle/2XXMBERH/148332
专题	机电工程学院省部共建有色金属先进加工与再利用国家重点实验室实验室建设与管理处
通讯作者	Yu Weiyuan
作者单位	1.Lanzhou Univ Technol, Sch Mech & Elect Engn, Lanzhou 730050, Peoples R China; 2.Lanzhou Univ Technol, Sch Mat Sci & Engn, Lanzhou 730050, Peoples R China; 3.Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China
第一作者单位	兰州理工大学
通讯作者单位	材料科学与工程学院; 省部共建有色金属先进加工与再利用国家重点实验室
第一作者的第一单位	兰州理工大学
推荐引用方式 GB/T 7714	Wang Youliang,Zhang Tao,Yu Weiyuan,et al. Review on Joining Technology of Aluminum Alloy and Resin Matrix Composites[J]. RARE METAL MATERIALS AND ENGINEERING,2021,50(3):753-761.
APA	Wang Youliang,Zhang Tao,Yu Weiyuan,&Zhang Wenjuan.(2021).Review on Joining Technology of Aluminum Alloy and Resin Matrix Composites.RARE METAL MATERIALS AND ENGINEERING,50(3),753-761.
MLA	Wang Youliang,et al."Review on Joining Technology of Aluminum Alloy and Resin Matrix Composites".RARE METAL MATERIALS AND ENGINEERING 50.3(2021):753-761.