Institutional Repository of Coll Mat Sci & Engn
Reaction synthesis and characterization of a new class high entropy carbide (NbTaMoW)C | |
Liu, Diqiang1,2; Zhang, Aijun1; Jia, Jiangang3; Zhang, Junyan1; Meng, Junhu1 | |
2021-02-15 | |
发表期刊 | Materials Science and Engineering A |
ISSN | 09215093 |
卷号 | 804 |
摘要 | A new class of high entropy carbide (NbTaMoW)C was fabricated by reaction synthesis at temperatures as low as 1800 °C using metal powders and graphite as raw materials. Phase formation, compositional uniformity, and microstructure of the (NbTaMoW)C were investigated. The experimental results showed that partial solid solution phase was formed when sample sintered at 1600 °C, according to XRD peak fitting and deconvolution. The as-prepared (NbTaMoW)C with relative density of 97.3% possessed a single-phase rock-salt crystal structure, in which the four metal elements are randomly distributed on the cation sublattice while C occupies the anion sublattice. It was further revealed that (NbTaMoW)C had a high compositional uniformity and the average grain size is 9 ± 0.5 μm. By taking the advantage of these characteristics, the microhardness of (NbTaMoW)C was significantly improved as compared with the base monocarbides. The increase in hardness was attributed to the solid solution strength mechanism. Meanwhile, (NbTaMoW)C exhibited high flexural strength and a relatively low thermal conductivity of 3.19 ± 0.04 mm2/s at room temperature. With temperature increasing, the thermal conductivity of (NbTaMoW)C increases over the entire temperature range from 25 to 1000 °C. © 2020 Elsevier B.V. |
关键词 | Carbides Crystal structure Entropy Molybdenum compounds Niobium compounds Powder metals Solid solutions Tantalum compounds Thermal conductivity Average grain size Compositional uniformity High flexural strength Low thermal conductivity Partial solid solutions Randomly distributed Reaction synthesis Temperature range |
DOI | 10.1016/j.msea.2020.140520 |
收录类别 | EI ; SCIE |
语种 | 英语 |
WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
WOS类目 | Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:000616000900003 |
出版者 | Elsevier Ltd |
EI入藏号 | 20204709509486 |
EI主题词 | Tungsten compounds |
EI分类号 | 641.1 Thermodynamics - 804.2 Inorganic Compounds - 933 Solid State Physics - 933.1.1 Crystal Lattice |
来源库 | Compendex |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | https://ir.lut.edu.cn/handle/2XXMBERH/147157 |
专题 | 材料科学与工程学院 |
通讯作者 | Meng, Junhu |
作者单位 | 1.Chinese Acad Sci, Lanzhou Inst Chem Phys, Key Lab Sci & Technol Wear & Protect Mat, Lanzhou 730000, Peoples R China; 2.Univ Chinese Acad Sci, Ctr Mat Sci & Optoelect Engn, Beijing 100049, Peoples R China; 3.Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China |
推荐引用方式 GB/T 7714 | Liu, Diqiang,Zhang, Aijun,Jia, Jiangang,et al. Reaction synthesis and characterization of a new class high entropy carbide (NbTaMoW)C[J]. Materials Science and Engineering A,2021,804. |
APA | Liu, Diqiang,Zhang, Aijun,Jia, Jiangang,Zhang, Junyan,&Meng, Junhu.(2021).Reaction synthesis and characterization of a new class high entropy carbide (NbTaMoW)C.Materials Science and Engineering A,804. |
MLA | Liu, Diqiang,et al."Reaction synthesis and characterization of a new class high entropy carbide (NbTaMoW)C".Materials Science and Engineering A 804(2021). |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论